Products
(size of white box on all models is: 6" wide x 2.5" tall x 3.0" deep)
This is the 120/240 VAC ribbon-LED version of our domestic and small commercial single-phase EMP Shield for the USA. It will protect homes of under 10,000 sq ft in floor space. It needs to be wired to a household breaker box by a qualified electrician across any two breakers for 20 amp capacity or larger.

Note: The white box should be mounted inside your circuit breaker box and the LED panel should be mounted on the wall next to the circuit breaker box.

Click here to order now.

This is the 120/240 VAC hard-wired version of our domestic and small commercial single-phase EMP Shield for the USA. It will protect homes of under 10,000 sq ft in floor space. It needs to be wired to a household breaker box by a qualified electrician across any two breakers for 20 amp capacity or larger.

Note: It should be mounted outside your circuit breaker box but it can be mounted inside. You just will not be able to see the LEDs that indicate the unit is functioning properly.

Click here to order now.

This is the 120/240 VAC terminal block version of our domestic and small commercial single-phase EMP Shield for the USA. It will protect homes of under 10,000 sq ft in floor space. It needs to be wired to a household breaker box by a qualified electrician across any two breakers for 20 amp capacity or larger.

Note: It should be mounted inside your circuit breaker box for safety reasons but it can be mounted outside on the wall. It needs to stay dry.

Click here to order now.

This is the 277/480 VAC ribbon-LED version of our commercial 3-phase EMP Shield for the USA. It will protect businesses of under 10,000 sq ft in floor space. It needs to be wired to the main breaker box by a qualified electrician across any two breakers for 20 amp capacity or larger.

Note: The white box should be mounted inside your circuit breaker box and the LED panel should be mounted on the wall next to the circuit breaker box.

Click here to order now.

This is the 277/480 VAC hard-wired version of our commercial 3-phase EMP Shield for the USA. It will protect businesses of under 10,000 sq ft in floor space. It needs to be wired to the main breaker box by a qualified electrician across any two breakers for 20 amp capacity or larger.

Note: It should be mounted outside your circuit breaker box but it can be mounted inside. You just will not be able to see the LEDs that indicate the unit is functioning properly.

Click here to order now.

This is the 277/480 VAC terminal block version of our commercial 3-phase EMP Shield for the USA. It will protect businesses of under 10,000 sq ft in floor space. It needs to be wired to the main breaker box by a qualified electrician across any two breakers for 20 amp capacity or larger.

Note: It should be mounted inside your circuit breaker box for safety reasons but it can be mounted outside on the wall. It needs to stay dry.

Click here to order now.